E-mark certification

1. E-mark certification introduction and logo

1. Introduction to E-mark certification

E-Mark/e-Mark is also the European Common Market. For automobiles and motorcycles and their safety parts and products, noise and exhaust gas, etc., product certification is carried out in accordance with EU regulations [EEC Directives] and the regulations of the European Economic Commission [ECE Regulation] The qualification certificate issued by Shi Fang to ensure the safety of driving and the requirements of environmental protection.

2. E-mark certification mark

Europe has safety certification requirements for complete motor vehicles and safety-related components and systems, which are embodied in E-mark and e-mark certification.

One type of E-Mark/e-Mark certification mark is a round frame; the other is a rectangular frame, which represents different meanings.

The E mark is derived from the Regulations promulgated by the Economic Commission of Europe (ECE). It is the European market for automobiles, locomotives and their safety parts, noise and exhaust gas, etc., in accordance with the provisions of the European Union Directives (EEC Directives) and the European Economic Commission Regulations (ECE Regulation), and the product certification requirements are granted, that is, a certificate of conformity is awarded. To ensure the safety of driving and the requirements of environmental protection.

E-mark certification-vehicle product testing-microtest testing

Round frame: refers to products that must be used when the vehicle is stopped and in motion, such as windshield, seat belt, headlights, etc.

The e mark is a certification mark for complete vehicles, safety parts and systems that the European Commission compulsory member states to use in accordance with EU directives. The testing agency must be a technical service agency in an EU member state, and the certification agency is a government transportation department in an EU member state All EU member states will recognize products that have obtained e-mark certification.

E-mark certification-vehicle product testing-microtest testing

Rectangular frame: refers to products that can be used normally but not necessary when the vehicle is stopped and in motion, such as car chargers, car lamps/torches, etc.

2. E-mark certification applicable country and number

1. E mark certificate The certificates of various countries have corresponding numbers:

E1—Germany; E2—France; E3—Italy; E4—Netherlands; E5—Sweden; E6—Belgium; E7—Hungary; E8—Czech Republic; E9—Spain; E10—Yugoslavia; E11—UK; E12—Austria; E13— Luxembourg; E14—Switzerland; E16—Norway; E17—Finland; E18—Denmark; E19—Romania; E20—Poland; E21—Portugal; E22—Russia; E23—Greece; E25—Croatia; E26—Slovenia; E27—Slovakia; E28—Belarus; E29—Estonia; E31—Bosnia and Herzegovina; E37—Turkey; E57—San Marino.

2. The certificates of the member states of the e-mark certificate have corresponding numbers:

e1—Germany; e2—France, e3—Italy; e4—Netherlands; e5—Sweden; e6—Belgium, e9—Spain; e11—United Kingdom; e12—Austria; e13—Luxembourg; e17—Finland; e18—Denmark; e21—Portugal; e23—Greece; e24—Ireland.

3. E-mark certification process and cycle

1. E-mark certification process

1) The manufacturer prepares product information documents, materials and samples;

The information contains:

A. COP agreement (applicant and manufacturer are not provided at the same time).

B. The manufacturer provides a system certificate to confirm whether a factory inspection is required.

2) Start the test, test items:

l Radiation disturbance (30~1000MHz);

l Transient conduction emission (fast pulse/slow pulse);

l Transient conduction immunity of power line (pulse1/2a/2b/3a/3b/4);

l Radiation immunity-anechoic chamber method (400~2000MHz);

l Radiation immunity-harness excitation method (20~400MHz).

3) Submit test report and manufacturer's technical data for review.

4) European transportation agencies issue certificates (licensing agencies may conduct regular or irregular follow-up factory inspections on certified product manufacturers).

2. E-mark certification cycle

Usually 3-6 weeks.

3. CE certification (EN50498) certification process

1) Provide application form, product information documents, samples, including matching wiring harness

2) Test report

Test items:

l Radiation disturbance (30~1000MHz);

l Transient conduction emission of power line (fast pulse + slow pulse);

l Transient conduction immunity of power line (pulse1/2a/2b/3a/3b/4).

4. Certification period and number of samples

1) CE certification (EN50498) certification cycle generally takes 3-5 working days.

2) Number of samples required: 2 pcs.